Electric hydraulic aerial work platform
1.No exhaust gas, low noise, suitable for various indoor and outdoor scenarios.
2.The lifting process is uniform and stable, not easy to shake, and the operation is more reassuring.
3.Handle/button control, quick to get started, one person can complete the task.
4.It can be walked on its own or easily pushed, with flexible turning and can also be used in small spaces.
5.Equipped with safety devices such as guardrails, emergency stops, and fall protection.
Product Introduction
The electric hydraulic high-altitude operation lifting platform is a high-altitude operation equipment powered by electric and hydraulic power. It has stable lifting and easy operation, and can be easily controlled by a single person. It comes with safety protection and is widely used in factory maintenance, venue installation, property cleaning, engineering construction and other scenarios. It is safe, efficient, flexible and convenient.
1. Adopting electric hydraulic drive, the lifting is smooth, the noise is low, and there is no pollution.
2. Easy to operate, one person can control the lifting and lowering, convenient to use.
3. Fully equipped with safety features such as guardrails, emergency stops, and fall protection devices.
4. Flexible mobility, suitable for high-altitude operations in narrow indoor and outdoor spaces.
5. Widely used in scenarios such as maintenance, installation, cleaning, and upkeep, with high efficiency.
Product Parameters
Part Name | Technical parameters | Part Name | Technical parameters |
Table top | 2300X1170mm | platform frame
| 8mm iron plate |
Minimum altitude | 1820mm(After folding the guardrail) | Driving mode
| Hydraulic motor drive |
Maximum increase of the platform | 8m | Move mode | Fully automatic rubber and all-steel wire track walking |
Maximum working height | 10m | Overall dimensions (length, width and height approximately) | 2700*1650*1820mm |
load rating | 320kg | Net Weight
| About 2400kg |
The motor power of the lifting oil pump | 4.5kw | Lifting speed
| 4.5m/min |
Lego Eco-punk
| 300X5000mm | Movement speed | 0-30m/min |
Part Name | Configuration | Part Name | Configuration |
Scissors, knives and forks (3 sets) | 120*80*4.5mm Rectangular tube (Mn steel)Q345 | Chassis | An 8mm thick box structure |
Hydraulic power pack | Special hydraulic pump station for lifting work platforms. Install an emergency descent valve to manually control the descent when the platform is powered off. It is equipped with an internal relief valve, which can prevent the system pressure from being too high during upward movement and provide overload protection | Hydraulic cylinder | HSG80/55 ,1 built-in explosion-proof valve (to prevent oil pipe breakage and platform stall descent); The sealing ring is durable and does not leak. |
Drive mode | Hydraulic motor drive | Accumulator | Yong 8 fault block 48V maintenance-free batteries, with a one-year warranty |
Hydraulic pipe | Multi-layer steel mesh rubber oil pipe | Diameter
| No. 45 round steel |
High CAM
| 90x16 seamless pipe | Color of paint | spraying plastics |
Countertop guardrail | 30X30X800mm square tube | Control system | stick control DTC |
Countertop | 5mm iron plate | Electric System | Circuit breakers, intermediate relays, chargers, limit switches, etc |
Bearing | SF—1 Oil-free self-lubricating bearing | Colour | Customization is available according to customer requirements |
sealing element | oil seal |
Product Classification
1. Mobile lifting platform
Equipped with casters, it can be pushed and moved, suitable for temporary high-altitude operations indoors and outdoors.
2. Fixed lifting platform
Fixed installation on the ground or pit, used for lifting and lowering goods between floors.
3. Self propelled lifting platform
Equipped with a built-in drive, it can walk and turn on its own, with high operational efficiency.
4. Vehicle mounted lifting platform
Installed on the chassis of a car, it has fast transition and is suitable for outdoor repair and maintenance.
5. Aluminum alloy lifting platform
The body is lightweight, beautiful, and has a moderate load capacity, suitable for indoor light high-altitude operations.
Working Principle
1. Powered by an electric motor, the hydraulic oil pump is driven to produce high-pressure oil.
2. High pressure oil enters the hydraulic cylinder, pushing the piston to expand and contract, and driving the scissor/arm to rise and fall.
3. By controlling the valve to regulate the oil volume, the platform can be raised, lowered, and stopped.
4. The overall system relies on hydraulic transmission, ensuring smooth lifting, uniform force distribution, and safety and reliability.
5. In conjunction with the electrical control system, it can be easily operated by a single person.
Product Application
1. Factory workshop: equipment maintenance, lighting installation, pipeline maintenance.
2. Warehouse logistics: loading and unloading of goods, high-altitude sorting, and warehouse inspection.
3. Property mall: high-altitude cleaning, replacement of lighting fixtures, decoration and installation.
4. Municipal engineering: street lamp maintenance, venue construction, billboard installation.
5. Construction: exterior wall work, interior decoration, high-altitude installation engineering
Company Strengths
Our company is a high-tech enterprise specializing in the research and development, production, sales, and comprehensive services of electric hydraulic high-altitude operation lifting platforms. We have been deeply involved in the field of high-altitude operation equipment for many years and have become one of the benchmark enterprises in the domestic high-altitude operation equipment industry with mature technical strength, strict quality control, and a perfect service system. We are committed to providing safe, efficient, and convenient high-altitude operation overall solutions for customers in various industries, helping them improve operation efficiency, reduce safety risks, and save operating costs.
Since its establishment, the company has always adhered to the business philosophy of "integrity-based, technology driven enterprise, quality first, and win-win service", based on industry needs, focusing on technological innovation, continuously cultivating the core field of electric hydraulic lifting platforms, and accumulating rich industry experience and technical accumulation. The company has a standardized production base equipped with automated CNC production lines, laser cutting equipment, and professional testing equipment, achieving standardized control of the entire process from raw material selection, component processing, complete machine assembly to finished product testing. Its annual production capacity ranks among the top in the industry and can meet the bulk procurement and customization needs of different customers, ensuring that every product meets industry standards and customer requirements.
FAQ
1. Question: Does equipment operation require professional qualifications?
Answer: No professional qualifications required, it can be mastered by a single person and comes with simple operation instructions.
2. Question: Where can the equipment be used?
Answer: It is suitable for both indoor and outdoor use, and can operate normally in narrow spaces and flat surfaces.
3. Question: What should be paid attention to in daily maintenance?
Answer: Regularly check the hydraulic oil and power supply, and keep the equipment clean.
4. Question: How should I handle a malfunction?
Answer: Contact after-sales service, 1 hour response, 24 hours on-site repair.
5. Question: Is it possible to customize different specifications?
Answer: Yes, we can customize exclusive solutions based on lifting height and load requirements.
