Steel Loading Ramp
1. Two-fold structure, highly adaptable. The Steel Loading Ramp adopts a two-fold design, which can flexibly match different platforms and container heights.
2. Hydraulic drive, efficient and labor-saving. The mature hydraulic loading ramp system enables rapid lifting and lowering, reducing manual operations.
3. Heavy-duty design, stable and durable. Compliant with heavy-duty ramp standards, suitable for frequent passage by forklifts and heavy goods.
4. All-steel structure, sturdy and reliable. High-strength steel and industrial welding technology, suitable for long-term industrial use.
5. High input-output ratio, simple maintenance, long lifespan. Suitable for logistics, factories and equipment leasing scenarios.
Product Introduction
The Steel Loading Ramp is a two-fold hydraulic loading ramp specially designed for industrial logistics and warehouse loading/unloading scenarios. This equipment does not require a fixed foundation and can achieve efficient connection between trucks, containers and the warehouse floor. It is an indispensable loading and unloading solution in modern logistics systems. As one of the professional industrial ramp suppliers' products, this Steel Loading Ramp was designed with full consideration of the usage habits and safety standards of the international market, while also taking into account flexibility, stability and economy.
1. Two-fold slope structure: main slope + extended lip plate, suitable for different carriage heights
2. Hydraulic lifting system: stable and reliable, meeting the requirements of frequent loading and unloading
3. Anti-slip steel plate surface: ensuring the safety of forklifts and personnel during operation
4. Mobile or semi-fixed design: suitable for shared use in multiple workstations
Product Parameters
External dimensions | Expansion dimensions: 11550mm (length) x 2200mm (width) x 1500mm (height) Folding up dimensions: 6000mm (length) x 2180mm (width) x 2200mm (height) |
Platform size | Slope length (mm): 7200 ,Tail board (mm): 86mm, Front tongue plate(mm): 400mm, Equipment interior width: 2100mm, covered with 4mm steel plate and 6mm steel plate mesh |
Rated load capacity | 10000KG |
Equipped with power | Manual hydraulic pump, 2 hand cranked legs |
Adjustment range | 1100-1800mm (equipment adjustment range) |
Guardrail height | 300mm (40 x 80 x 3mm rectangular tube) |
Main structure | 160 x 80 x 4 rectangular tube 120 x 60 x 4 rectangular tube 5 main beams (with a spacing of about 40cm between the cross braces) |
Secondary beam structure | 100 x 50 x 4mm rectangular tube |
Hydraulic cylinder | Φ 80 x Φ 45 (2 pieces) |
Hydraulic tubing | 32Mpa high-pressure oil pipe |
Mobile rubber wheels | 600-9 solid tire |
Bridge and Container | The bridge body is welded with hooks and fixed with steel chains |
Paint surface | Blue (Qilu Acrylic Resin Paint) |
Product Classification
1. Modular steel structure design
The Steel Loading Ramp is manufactured in a modular manner, facilitating transportation, installation and subsequent maintenance, and meeting the demands of different countries.
2. High anti-slip performance slope surface
The slope surface is made of patterned steel plates or anti-slip grid structures, effectively preventing forklifts from slipping and enhancing operational safety.
3. Stable hydraulic support system
The hydraulic loading ramp system is equipped with high-strength cylinders and safety valves to ensure smooth operation even when fully loaded.
4. Compatible with various logistics equipment
It is compatible with electric forklifts, diesel forklifts and manual handling equipment, meeting the needs of different levels of operational intensity.
Working Principle
1. The lifting is driven by the hydraulic system
The hydraulic pump station drives the cylinder to raise or lower the main slope of the Steel Loading Ramp.
2. The two-fold slopes are unfolded and connected
After the main slope rises to the target height, the front folding lip plates naturally unfold and closely fit with the rear of the truck or container.
3. A stable loading and unloading passage is formed
A continuous passage is formed between the ramp and the ground, as well as between the ramp and the vehicle compartment. Forklifts can safely pass up and down.
4. The load is evenly distributed
The heavy-duty ramp structure evenly distributes the load to the support legs and the ground, enhancing overall stability.
5. It quickly returns to the folded position after the operation
After the loading and unloading is completed, the ramp is retracted and folded by the hydraulic system, facilitating transfer or storage.
Product Application
1. Logistics Park and Distribution Center
The Steel Loading Ramp is an important loading and unloading equipment for the rapid turnover of goods in the logistics center.
2. Loading Area of Manufacturing Factory
It is suitable for frequent loading and unloading operations such as the entry and exit of raw materials in the factory and the shipment of finished products.
3. Container Loading and Unloading Operations
The hydraulic loading ramp can directly connect 20ft / 40ft containers, improving the loading efficiency.
4. Warehousing and Third-Party Logistics (3PL)
It is suitable for flexible loading and unloading requirements for multiple customers and multiple batches.
5. Equipment Rental and Temporary Projects
No need for construction work, the Steel Loading Ramp is very suitable for short-term or mobile projects.
Company Strengths
1. Years of industrial loading equipment manufacturing experience
As a professional industrial ramp supplier, we have been deeply involved in the field of loading ramps and logistics equipment for many years.
2. Strict quality control system
From raw material procurement to finished product delivery, Steel Loading Ramp undergoes multiple quality inspections.
3. Support for customized solutions
The load-bearing capacity, size, slope, and surface treatment method can be customized according to customer requirements.
4. Mature international export experience
The products have been exported to multiple countries and regions, and are familiar with international standards such as CE.
5. Complete pre-sale and after-sale services
Provide technical consultation, installation guidance, and long-term spare parts support to ensure customers' worry-free long-term use.
FAQ
Q1: What is the maximum load capacity of the Steel Loading Ramp?
A: The load capacity varies depending on the model. The common range is 6-15 tons. The heavy-duty ramp can be customized according to project requirements.
Q2: Does the hydraulic loading ramp need to be fixed for installation?
A: The two-fold Steel Loading Ramp usually does not require fixed civil engineering. It can be moved or semi-fixed for greater flexibility.
Q3: Is this product suitable for long-term outdoor use?
A: Yes, the ramp uses anti-corrosion steel structure and industrial-grade coating, making it suitable for complex outdoor environments.
Q4: As an industrial ramp supplier, do you support OEM?
A: OEM/ODM services are supported. Custom production can be carried out according to brand, size and technical requirements.
