Good Mobile Ramp
1. Rigidity and stability: The Q235 manganese steel is integrally formed, with a load capacity of 10-20 tons. It does not deform during high-frequency operations.
2. Comprehensive safety protection: Anti-slip connecting plates + double anti-fall design + cushion pads. No slipping even in rainy weather, ensuring zero risk during operation.
3. Low consumption and easy maintenance: No foldable wear-prone parts, with a fault rate of 50% lower, a lifespan of 12-15 years, and a maintenance cost reduction of 60% per year.
4. Flexible adaptation to the site: Dual fixation methods, no need for complex renovations, adjustable size, suitable for multiple sites and multiple vehicle types.
Product Introduction
The Good Mobile Ramp is specially designed for large logistics parks, port terminals, heavy manufacturing factories and other high-frequency and heavy-load scenarios. With "rigid structure + efficient operation" as its core, it completely resolves core pain points such as equipment shaking, continuous operation component fatigue wear, and impact on traffic efficiency in heavy-load scenarios, becoming the core supporting equipment for fixed connection of bulk goods such as steel, building materials, and container full container loading and unloading.
1. It is formed by the Q235 high-strength manganese steel integrated submerged arc welding process. The weld seams have undergone ultrasonic flaw detection and show no hidden defects. The main beam is equipped with 8 high-density reinforcing plates to form a closed load-bearing frame. Under a rated load of 10-30 tons, it can undergo long-term high-frequency operation without deformation. The peak load capacity can be customized and expanded to 50 tons as needed, meeting the heavy-load requirements of heavy machinery and bulk building materials.
2. It is equipped with a high-power electric hydraulic integrated drive system. The lifting speed is 1.2m/min. The height adjustment range covers 0.6-1.8m. It supports 1-5cm precise fine adjustment. It can complete the seamless connection between the truck compartment and the platform with one click. Compared with traditional equipment, the operation efficiency is improved by 40%, and the entire loading and unloading cycle of full containers is significantly shortened.
3. It is equipped with an 800mm extended anti-slip connection plate. The surface adopts a dual anti-slip design of diamond-shaped pattern steel plates and edge anti-slip teeth. The bottom of the connection plate is equipped with a thick rubber buffer pad. It not only ensures zero slipping of forklifts in rainy, dewy, and other humid scenarios, but also effectively reduces the impact when the truck is parked, protecting the equipment and the compartment from damage.
4. The integrated rigid structure has no folded hinged worn components. The core hydraulic components and motors are selected from industry-leading brands. The overall equipment failure rate is 50% lower than that of traditional folding models. The design service life is up to 12-15 years. Daily maintenance only requires regular checks of hydraulic oil level and sealant status. No complex disassembly is required. The annual maintenance cost is 60% lower than that of traditional equipment.
Product Parameters
External dimensions | Expansion dimensions: 11400mm (length) x 2100mm (width) x 1500mm (height) |
Platform size | Slope length (mm): 7200 ,Tail board (mm): 86mm, Front tongue plate(mm): 400mm, Equipment interior width: 2100mm, covered with 4mm steel plate and 6mm steel plate mesh |
Rated load capacity | 10000KG |
Equipped with power | Manual hydraulic pump, 2 hand cranked legs |
Adjustment range | 1100-1800mm (equipment adjustment range) |
Guardrail height | 300mm (40 x 80 x 3mm rectangular tube) |
Main structure | 160 x 80 x 4 rectangular tube 120 x 60 x 4 rectangular tube 5 main beams (with a spacing of about 40cm between the cross braces) |
Secondary beam structure | 100 x 50 x 4mm rectangular tube |
Hydraulic cylinder | Φ 80 x Φ 45 (2 pieces) |
Hydraulic tubing | 32Mpa high-pressure oil pipe |
Mobile rubber wheels | 600-9 solid tire |
Bridge and Container | The bridge body is welded with hooks and fixed with steel chains |
Paint surface | Blue (Qilu Acrylic Resin Paint) |
Product Classification
1. Heavy-duty Efficient Model: Focuses on providing large-tonnage support, suitable for high-frequency heavy-load scenarios such as logistics parks and ports. Rated load capacity is 10-20 tons, with maximum operational efficiency.
2. Outdoor Weather-resistant Model: Fully resistant to rust and moisture, with IP65 high protection level, suitable for harsh outdoor environments such as open platforms and ports. Operates stably within a wide temperature range.
3. Intelligent Operation Model: Features high memory and intelligent protection, allowing for precise one-click connection. Suitable for manufacturing factories and large distribution centers, reducing reliance on human resources.
4. Economical and Practical Model: High-performance modular design with 8-20 ton standard load capacity, suitable for small and medium-sized logistics companies and regional distribution centers. Easy to install and maintain.
5. Export Customized Model: Complies with international certifications such as CE, and can be customized for voltage / interface. Comes with shipping packaging and customs declaration documents, suitable for various overseas markets.
Working Principle
After the entire machine is fixed on the platform / ground foundation, an electric hydraulic pump injects hydraulic oil into the hydraulic cylinder, which then pushes the front connecting plate to perform a lifting movement around the fixed hinge point. This enables a height adjustment ranging from 0.6 to 1.8 meters and a fine adjustment of 1 to 5 centimeters, ensuring a precise fit with the height of the freight car body. After the height is leveled, the hydraulic pressure holding valve locks the oil circuit, and together with the mechanical limit lock, it firmly fixes the connecting plate, forming a rigid and seamless connection between the platform and the car body. When a forklift is carrying heavy loads, the integral main beam evenly transmits the load to the ground foundation, without stress concentration. After the operation is completed, the hydraulic relief valve is opened, and the oil in the hydraulic cylinder flows back. The connecting plate naturally falls back to its initial position, waiting for the next operation.
Product Application
1. Large logistics parks and warehousing hubs: Specifically designed for fixed connection operations of containers and heavy trucks, capable of supporting high-frequency containerized loading and unloading of bulk goods, effectively enhancing the overall logistics circulation efficiency of the park;
2. Fixed operation areas at ports/docks: Capable of withstanding strong winds and heavy-load operations in the port area, suitable for the loading and unloading of containerized and bulk cargo, achieving smooth and seamless connection between the dock operation area and freight vehicles;
3. Heavy manufacturing factories: Specifically for the loading and unloading of heavy goods such as mechanical molds, chemical raw materials, and core components of automobiles, ensuring stable and secure connection between the workshop platform and freight vehicles, matching the high-frequency operation rhythm of the production line;
4. Large-scale supermarket chain distribution centers: Meeting the batch loading and unloading requirements of standard goods such as food and daily necessities, seamlessly connecting the platform with box-type delivery vehicles, significantly improving the efficiency of goods replenishment and cross-region transportation;
5. Building materials/steel professional wholesale markets: Resistant to long-term heavy-load and wear of materials such as pipes and profiles, suitable for the all-day high-frequency operation requirements of the fixed loading and unloading area of the market, meeting the daily loading and unloading turnover of merchants.
Company Strengths
A 80,000-square-meter intelligent production base will be built, equipped with 4 standardized workshops and 38 sets of automated processing equipment. It covers high-end equipment such as PLC fully automatic cold bending forming lines, intelligent welding robots, and electrostatic spraying assembly lines, achieving full-process standardization production from steel cutting to complete machine inspection. The MES production execution system and ERP intelligent management system will be introduced, enabling visual tracking of the entire order delivery process. Standard models are available in stock, and the delivery cycle for customized models is reduced to 7 days. The annual production capacity exceeds 8,000 units, and the self-production rate of core components (hydraulic cylinders, sealing systems) reaches 90%. A strict factory inspection system has been established, with each piece of equipment undergoing 12 specialized verifications such as pressure load testing, 1,000 lifting and lowering cycle tests, and hydraulic oil temperature stability detection. The pass rate of the first inspection is 99.2%.
FAQ
1. Q: What complete set of customs clearance documents can be provided?
A: We can provide all the formal and standardized documents required for customs clearance at global ports, including commercial invoices, packing lists, General Certificate of Origin / Preferential Origin Certificate (CO/Form A), product inspection reports, fumigation certificates, certification copies, etc. All documents are prepared according to the buyer's customs declaration requirements.
2. Q: How long is the production and delivery cycle for standard and customized models?
A: The standard one-piece boarding bridge is available in stock. The delivery cycle is 7-10 working days (from payment to shipment). The production cycle for customized models (such as adjusting load capacity, size, adapting to extreme climates, etc.) is 15-20 working days. The specific duration is subject to the confirmed customization plan.
3. Q: What payment methods are supported for overseas buyers?
A: We support mainstream international payment methods: Telegraphic Transfer (T/T, 30% deposit in advance, 70% balance paid before shipment), Sight Irrevocable Letter of Credit (L/C at sight), and Western Union remittance for small orders. Flexible payment terms can be negotiated for bulk purchase orders.
