Scissor lift
1. Stable structure and strong load-bearing capacity
2. Smooth lifting and easy and safe operation
3. Small footprint, flexible and convenient mobility
4. Easy maintenance and low failure rate
5. Wide applicability and high cost-effectiveness
Product Introduction
The scissor lift adopts a high-strength scissor type mechanical structure, which is stable, safe and reliable for lifting and lowering. It is widely used in scenarios such as factory maintenance, warehouse loading and unloading, and engineering construction, and is an ideal equipment for efficient high-altitude operations and material handling.
1. Smooth lifting and excellent load-bearing performance, ensuring safe operation
2. Compact structure, small space occupation, flexible movement and steering
23. Easy to operate, precise start stop, and high work efficiency
4. Strong durability, low maintenance cost, suitable for high-altitude operations in multiple scenarios
Product Parameters
Part Name | Technical parameters | Part Name | Technical parameters |
Table top | 2300X1170mm | platform frame
| 8mm iron plate |
Minimum altitude | 1820mm(After folding the guardrail) | Driving mode
| Hydraulic motor drive |
Maximum increase of the platform | 8m | Move mode | Fully automatic rubber and all-steel wire track walking |
Maximum working height | 10m | Overall dimensions (length, width and height approximately) | 2700*1650*1820mm |
load rating | 320kg | Net Weight
| About 2400kg |
The motor power of the lifting oil pump | 4.5kw | Lifting speed
| 4.5m/min |
Lego Eco-punk
| 300X5000mm | Movement speed | 0-30m/min |
Part Name | Configuration | Part Name | Configuration |
Scissors, knives and forks (3 sets) | 120*80*4.5mm Rectangular tube (Mn steel)Q345 | Chassis | An 8mm thick box structure |
Hydraulic power pack | Special hydraulic pump station for lifting work platforms. Install an emergency descent valve to manually control the descent when the platform is powered off. It is equipped with an internal relief valve, which can prevent the system pressure from being too high during upward movement and provide overload protection | Hydraulic cylinder | HSG80/55 ,1 built-in explosion-proof valve (to prevent oil pipe breakage and platform stall descent); The sealing ring is durable and does not leak. |
Drive mode | Hydraulic motor drive | Accumulator | Yong 8 fault block 48V maintenance-free batteries, with a one-year warranty |
Hydraulic pipe | Multi-layer steel mesh rubber oil pipe | Diameter
| No. 45 round steel |
High CAM
| 90x16 seamless pipe | Color of paint | spraying plastics |
Countertop guardrail | 30X30X800mm square tube | Control system | stick control DTC |
Countertop | 5mm iron plate | Electric System | Circuit breakers, intermediate relays, chargers, limit switches, etc |
Bearing | SF—1 Oil-free self-lubricating bearing | Colour | Customization is available according to customer requirements |
sealing element | oil seal |
Product Classification
1. The scissor structure is sturdy and has good lifting stability
2. Simple and convenient operation, complete safety protection
3. Compact and flexible in size, with strong adaptability to the site
4. The whole machine is durable and reliable, with low maintenance costs
Working Principle
1. Relying on the hydraulic system to provide power and drive the oil cylinder to expand and contract
2. The scissor arm expands or contracts with the action of the oil cylinder to achieve lifting and lowering
3. The mechanical linkage is synchronized and linked to ensure the platform is level and stable
4. Hydraulic control throttling speed regulation, uniform and controllable lifting speed
5. Equipped with a safety locking device to prevent accidental sliding and ensure stability
Product Application
1. Installation and maintenance of factory workshop equipment
2. High altitude loading and unloading operations for warehousing and logistics goods
3. High altitude maintenance and cleaning of venues and properties
4. Municipal engineering, streetlight maintenance, and line inspection
5. High altitude construction and material transportation at construction sites
Company Strengths
The high-altitude work platform is an important component of our entire product line, covering various types such as scissor type and track type. It can provide customers with diversified choices according to different work heights, work scenarios, and load-bearing requirements. Our high-altitude work platforms are equipped with comprehensive safety protection devices, including anti fall safety locks, emergency stop buttons, overload protection devices, etc., to eliminate safety hazards from the source and ensure the personal safety of workers during high-altitude operations. At the same time, the operation of high-altitude work platforms is simple and convenient, without the need for professional operation qualifications. After simple training, it can be mastered, greatly reducing labor costs and improving work efficiency. It is widely used in various high-altitude work sites such as factory workshops, warehousing logistics, venue maintenance, municipal engineering, etc.
In response to the special operational needs of some customers, we provide professional customized services for custom scissor lift platforms, breaking through the size, load-bearing capacity, and lifting height limitations of conventional products. Based on the specific working conditions, operating environment, and personalized requirements of customers, we tailor make exclusive custom scissor lift platforms. We have a professional R&D and design team, combined with years of production experience, to provide customers with a full process service from scheme design, R&D and production to installation and commissioning, whether it is special sized scissor lifts, high load custom scissor lift platforms, or customized equipment suitable for special scenarios. We ensure that the custom scissor lift platform fully meets customer needs, while also considering safety, stability, and practicality.
FAQ
1.What is the delivery cycle for scissor lifts and crawler lifts?
Standard models take 15-30 working days, while custom scissor lift platforms require 30-45 working days for non-standard customized models.
2.Does the product comply with international standards?
Compliant, all scissor lifts, crawler lifts, and high-altitude work platforms are produced in accordance with international industry standards and can provide relevant testing reports.
3. Can we provide customized services for scissor lift platforms?
Sure, we can provide customized services throughout the entire process based on specific customer requirements such as working conditions, dimensions, and load capacity.
4. Does the product provide after-sales maintenance services?
Provide global after-sales maintenance, fault repair, and parts supply services, with timely response.
What are the safety protection configurations for high-altitude work platforms?
Equipped with anti fall safety locks, emergency stop buttons, and overload protection devices to ensure comprehensive work safety
