Electric Self Propelled Scissor Lift
1.Zero emission, low noise, suitable for indoor use.
2.Self-propelled design, flexible and easy to maneuver.
3.Multiple safety protections, stable and reliable.
4.Large load capacity, wide operating range.
5.Easy maintenance, long service life.
Product Introduction
The Electric Self Propelled Scissor Lift is a professional aerial work tool designed for efficient and safe high-altitude operations, integrating electric drive and self-propelled functions to meet the needs of various indoor and outdoor scenarios. Its core features and applicable scenarios are as follows:
1.Widely used in installation, maintenance, cleaning and decoration of high-altitude positions.
2.Electric power drive, energy-saving and environmentally friendly, no pollution.
3.Single-person operation on the platform, simple and flexible, improving work efficiency.
4.Suitable for airports, stations, workshops, stadiums and other places.
Product Parameters
Part Name | Technical parameters | Part Name | Technical parameters |
Table top | 2300X1170mm | platform frame
| 8mm iron plate |
Minimum altitude | 1820mm(After folding the guardrail) | Driving mode
| Hydraulic motor drive |
Maximum increase of the platform | 8m | Move mode | Fully automatic rubber and all-steel wire track walking |
Maximum working height | 10m | Overall dimensions (length, width and height approximately) | 2700*1650*1820mm |
load rating | 320kg | Net Weight
| About 2400kg |
The motor power of the lifting oil pump | 4.5kw | Lifting speed
| 4.5m/min |
Lego Eco-punk
| 300X5000mm | Movement speed | 0-30m/min |
Part Name | Configuration | Part Name | Configuration |
Scissors, knives and forks (3 sets) | 120*80*4.5mm Rectangular tube (Mn steel)Q345 | Chassis | An 8mm thick box structure |
Hydraulic power pack | Special hydraulic pump station for lifting work platforms. Install an emergency descent valve to manually control the descent when the platform is powered off. It is equipped with an internal relief valve, which can prevent the system pressure from being too high during upward movement and provide overload protection | Hydraulic cylinder | HSG80/55 ,1 built-in explosion-proof valve (to prevent oil pipe breakage and platform stall descent); The sealing ring is durable and does not leak. |
Drive mode | Hydraulic motor drive | Accumulator | Yong 8 fault block 48V maintenance-free batteries, with a one-year warranty |
Hydraulic pipe | Multi-layer steel mesh rubber oil pipe | Diameter
| No. 45 round steel |
High CAM
| 90x16 seamless pipe | Color of paint | spraying plastics |
Countertop guardrail | 30X30X800mm square tube | Control system | stick control DTC |
Countertop | 5mm iron plate | Electric System | Circuit breakers, intermediate relays, chargers, limit switches, etc |
Bearing | SF—1 Oil-free self-lubricating bearing | Colour | Customization is available according to customer requirements |
sealing element | oil seal |
Product Classification
1.Electric drive system, energy-saving and efficient, low power consumption.
2.Scissor-type lifting structure, stable lifting and landing, small space occupation when folded.
3.Integrated control panel, simple operation, easy to get started quickly.
4.Strong adaptability, applicable to both flat indoor and outdoor hard ground.
Working Principle
1.Power supply: It is powered by a built-in rechargeable battery, which provides stable electric energy for the whole machine’s drive and lifting system.
2.Lifting drive: The electric motor drives the hydraulic pump to generate hydraulic pressure, which pushes the scissor arm to stretch and retract.
3.Height adjustment: The hydraulic valve controls the flow of hydraulic oil, so as to adjust the lifting speed and stop position accurately.
4.Self-propelled movement: The electric drive motor drives the wheels, and the operator controls the direction and speed through the platform control panel to realize flexible movement.
5.Stability guarantee: The scissor-type structure and hydraulic locking device ensure the stability of the platform during lifting and operation
Product Application
The Electric Self Propelled Scissor Lift is widely used in various indoor and outdoor aerial work scenarios, covering multiple industries and fields. The specific application scenarios are as follows:
1.Indoor decoration: Used for ceiling installation, wall painting, lamp replacement and other high-altitude operations in residential and commercial buildings.
2.Industrial workshops: Suitable for equipment maintenance, pipeline installation and parts replacement in factories and workshops.
3.Public facilities: Applied to the maintenance and cleaning of airports, stations, stadiums and shopping malls.
4.Outdoor engineering: Used for high-altitude operations such as building exterior wall cleaning, billboard installation and street lamp maintenance.
5.Warehouse logistics: Assists in the stacking and picking of goods in high-level warehouses and logistics centers.
Company Strengths
The Electric Self Propelled Scissor Lift, as a core type of lifts machines, is widely recognized in the aerial work industry for its high efficiency, safety and flexibility, and it is closely associated with related models such as the 12m Lift Scissor and the Elevador de tijera. This advanced Electric Self Propelled Scissor Lift is extensively used in various indoor and outdoor aerial work scenarios, covering multiple industries and fields, and it serves as an indispensable piece of equipment for modern high-altitude operations, alongside other lifts machines that cater to different height and load requirements. The 12m Lift Scissor, a typical variant of the Electric Self Propelled Scissor Lift, is particularly popular due to its ideal working height, making it suitable for most medium-height aerial tasks, while the Elevador de tijera (Spanish for scissor lift) shares the same core structure and working principle as the Electric Self Propelled Scissor Lift, catering to Spanish-speaking markets with the same high standards of performance and safety. The specific application scenarios of the Electric Self Propelled Scissor Lift, including the 12m Lift Scissor and Elevador de tijera, are diverse and comprehensive, as detailed below, each scenario fully demonstrating the practical value and adaptability of these lifts machines in real-world operations
FAQ
Q: What is the maximum working height of the 12m Lift Scissor?
A: Its maximum working height is 12 meters.
Q: Is the Electric Self Propelled Scissor Lift suitable for indoor use?
A: Yes, it is zero-emission and low-noise, ideal for indoor operations.
Q: What power does the Electric Self Propelled Scissor Lift use?
A: It is powered by a built-in rechargeable battery.
Q: Can the Elevador de tijera be used outdoors?
A: Yes, it can operate on flat outdoor hard ground.
Q: Are these lifts machines easy to maintain?
A: Yes, they feature simple structure and easy maintenance
