12m electric scissor lift
- 12-meter height coverage, extensive work range
- Electric drive, zero emissions and low noise
- Simple operation, easy to control for a single operator
- Strong stability, with comprehensive safety protection
- Long-lasting endurance, low maintenance cost
Product Introduction
The 12m Electric Scissor Lift is a high-altitude work equipment that balances safety, efficiency, and environmental protection. It is tailored for various indoor and outdoor high-altitude work scenarios and has become the preferred equipment in the field of high-altitude work due to its excellent performance and adaptability. The core highlights are as follows:
1. Height adaptation: The maximum working height can reach 12 meters, covering most high-altitude operation needs
2. Environmentally friendly and efficient: electric drive design, zero emissions, low noise, suitable for multiple indoor and outdoor scenarios
3. Convenient and easy to operate: The operation process is simple, and one person can flexibly control it, improving work efficiency
4. Economical and practical: Low maintenance cost, stable battery life, balancing safety and practicality
Product Parameters
Part Name | Technical parameters | Part Name | Technical parameters |
Table top | 2300X1170mm | platform frame
| 8mm iron plate |
Minimum altitude | 1820mm(After folding the guardrail) | Driving mode
| Hydraulic motor drive |
Maximum increase of the platform | 8m | Move mode | Fully automatic rubber and all-steel wire track walking |
Maximum working height | 10m | Overall dimensions (length, width and height approximately) | 2700*1650*1820mm |
load rating | 320kg | Net Weight
| About 2400kg |
The motor power of the lifting oil pump | 4.5kw | Lifting speed
| 4.5m/min |
Lego Eco-punk
| 300X5000mm | Movement speed | 0-30m/min |
Part Name | Configuration | Part Name | Configuration |
Scissors, knives and forks (3 sets) | 120*80*4.5mm Rectangular tube (Mn steel)Q345 | Chassis | An 8mm thick box structure |
Hydraulic power pack | Special hydraulic pump station for lifting work platforms. Install an emergency descent valve to manually control the descent when the platform is powered off. It is equipped with an internal relief valve, which can prevent the system pressure from being too high during upward movement and provide overload protection | Hydraulic cylinder | HSG80/55 ,1 built-in explosion-proof valve (to prevent oil pipe breakage and platform stall descent); The sealing ring is durable and does not leak. |
Drive mode | Hydraulic motor drive | Accumulator | Yong 8 fault block 48V maintenance-free batteries, with a one-year warranty |
Hydraulic pipe | Multi-layer steel mesh rubber oil pipe | Diameter
| No. 45 round steel |
High CAM
| 90x16 seamless pipe | Color of paint | spraying plastics |
Countertop guardrail | 30X30X800mm square tube | Control system | stick control DTC |
Countertop | 5mm iron plate | Electric System | Circuit breakers, intermediate relays, chargers, limit switches, etc |
Bearing | SF—1 Oil-free self-lubricating bearing | Colour | Customization is available according to customer requirements |
sealing element | oil seal |
Product Classification
1. Strong high-altitude adaptability: The maximum working height can reach 12 meters, easily covering various conventional high-altitude work scenarios without the need for additional auxiliary facilities.
2. Environmental protection and low consumption: Pure electric drive, no exhaust emissions, low operating noise, suitable for indoor enclosed spaces and work scenarios with high environmental requirements.
3. Convenient operation: The control process is simple and easy to understand, and one person can complete lifting, moving and other operations, greatly improving the efficiency of high-altitude operations.
4. Economic durability: simple maintenance process, low cost, stable battery life, and sturdy body structure, balancing operational safety and long-term cost-effectiveness
Working Principle
1. Hydraulic driving principle: By using an electric hydraulic pump to convert electrical energy into hydraulic energy, hydraulic oil is circulated in the pipeline to provide power for the lifting and lowering of the scissor.
2. Scissor lifting principle: Hydraulic oil pushes the scissor structure to expand and contract, driving the work platform to lift smoothly and achieve height adjustment for high-altitude operations.
3. Stable support principle: The scissor structure is made of high-strength steel, which maintains structural rigidity during lifting and lowering, and is matched with an anti slip platform to ensure operational safety.
4. Power control principle: By controlling the hydraulic valve switch through the control panel, the hydraulic oil flow rate is adjusted to achieve precise control of lifting and moving.
5. Principle of endurance power supply: Built in large capacity battery provides continuous power supply for the electric hydraulic pump, ensuring uninterrupted operation during operation
Working Principle
-Architectural decoration scene: used for high-altitude operations such as wall painting, ceiling installation, and door and window installation in buildings, suitable for indoor and outdoor construction needs.
-Commercial venue scenario: suitable for high-altitude layout, lighting maintenance, signage installation and other operations in shopping malls, exhibition halls, hotels and other places.
-Municipal maintenance scenario: used for outdoor high-altitude operations such as maintenance of municipal road lights, maintenance of traffic signs, and high-altitude pruning of green belts.
-Industrial plant scenario: Suitable for high-altitude operations such as equipment installation, pipeline maintenance, and shelving to meet the needs of industrial production and maintenance.
-Warehouse logistics scenario: used for high-altitude operations such as sorting of shelves, storage and retrieval of goods, and maintenance of storage equipment in warehouses.
Company Strengths
As a professional and reliable aerial lifting equipment supplier, we have long been committed to providing high-quality 12m electric scissor lift, 12m portable scissor lift and various aerial lifting platform products, adhering to the business philosophy of "quality first, customer foremost", and forming obvious core advantages in the industry through years of technical accumulation and market practice. Our company's advantages are mainly reflected in five aspects, which fully guarantee the quality, performance and service of 12m electric scissor lift and other products, and win the trust and recognition of global customers.
Strong Technical R&D Strength: We have a professional R&D team composed of senior engineers with rich experience in aerial lifting platform research and development, focusing on the innovation and upgrading of 12m electric scissor lift and 12m portable scissor lift. The team has in-depth research on the structure, performance and safety of aerial lifting platform, and can continuously optimize product design according to market demand and customer feedback. We have independent R&D capabilities for key components of 12m electric scissor lift, which can effectively solve technical problems in product use and ensure that our 12m electric scissor lift has leading performance in the industry. At the same time, we pay attention to the research and development of energy-saving and environmental protection technologies, making our 12m portable scissor lift and other aerial lifting platform products more in line with the global low-carbon development trend, and enhancing the market competitiveness of products
FAQ
Q: What is the maximum working height of the 12m electric scissor lift?
A: The maximum working height is 12m, and the maximum platform height is 10m.
Q: Is the 12m electric scissor lift suitable for indoor operation?
A: Yes, it adopts electric drive with zero emission and low noise, which is fully suitable for indoor operation.
Q: How long can the 12m electric scissor lift work continuously?
A: It is equipped with a large-capacity battery, which can meet the needs of all-day continuous operation.
Q: Can one person operate the 12m electric scissor lift independently?
A: Yes, the operation process is simple, and a single person can flexibly control the lifting and movement.
Q: What after-sales services can be provided for the 12m electric scissor lift?
A: We provide installation guidance, operation training, spare parts supply and timely maintenance services
