Electric Hydraulic Scissor Lift

Product Introduction

Electric hydraulic scissor lift The electric hydraulic scissor lift is an efficient high-altitude operation equipment that combines the advantages of electric energy saving and hydraulic stability. It relies on a motor-driven hydraulic system to drive the rigid structure of the scissor arm to achieve smooth platform lifting, and has the characteristics of zero emissions, low noise, and strong load capacity. The equipment supports flexible turning in place and can adapt to small spaces such as workshops and warehouses. It comes standard with multiple safety devices such as overload warning, emergency descent, and anti overturning protection. It is widely used in indoor and outdoor high-altitude work scenarios such as factory equipment maintenance, high-level storage and retrieval in warehouses, municipal facility maintenance, and mall venue decoration. It is a high-altitude work solution that balances safety and practicality.

1. The electric hydraulic scissor lift is a high-altitude operation equipment that integrates electric drive and hydraulic transmission technology. It uses a battery as the power source, drives a hydraulic pump station to output pressure through a motor, and drives a hydraulic cylinder to extend and retract the scissor arm, achieving vertical lifting and lowering of the operation platform. It has the dual characteristics of strong power and smooth operation.

2. The core advantages of the equipment lie in stability and load-bearing performance. The scissor arm is welded with high-strength steel and strengthened for fatigue resistance through heat treatment. Coupled with a precise hydraulic valve control system, the lifting process is smooth without any lag or shaking amplitude, even when fully loaded; Conventional aircraft models can carry loads ranging from 200-1000kg and operate at heights of 3-18 meters, meeting the needs of most high-altitude work scenarios.

3. The safety configuration is comprehensive and reliable, equipped with multiple protective devices such as overload warning, emergency stop, anti overturning protection, and power-off emergency descent, to avoid the risks of high-altitude operations from the source; At the same time, the user-friendly design of the operation interface allows a single person to complete lifting, walking, and other operations, greatly reducing the cost and difficulty of manual training.

4. The device has a wide range of adaptability scenarios and, with its zero emission and low-noise electric advantages, can be used for indoor operations such as factory workshop maintenance, high-level storage and retrieval, and mall venue decoration; Some off-road models are equipped with anti-skid tires and reinforced chassis, and can also handle complex outdoor conditions such as municipal street lamp maintenance and building exterior wall construction.

5. Daily maintenance is convenient and cost-effective, with excellent sealing performance and low failure rate of the hydraulic system. It only requires regular inspection of the hydraulic oil status, battery level, and pin lubrication condition; Electric components do not require complex maintenance, and compared to fuel powered models, energy consumption is reduced by about 60%, making long-term use more economical.

Product Parameters

Product Classification

1. Classify by mobile mode

Fully self-propelled electric hydraulic scissor lift

Equipped with a built-in battery power system and walking drive, it can achieve stationary steering and autonomous movement without the need for external traction. Equipped with anti slip solid tires, the operation panel integrates lifting and walking functions, allowing one person to complete the task. Suitable for large-scale, high-frequency indoor and outdoor high-altitude operations in workshops, warehouses, etc.

Mobile electric hydraulic scissor lift

Without autonomous walking power, it needs to be manually pushed or pulled by a forklift for movement. The body is lightweight, compact in structure, and has a small turning radius. Some models are equipped with auxiliary mobile wheels, suitable for short-term operations in narrow spaces, such as ceiling maintenance in shopping malls and storage and retrieval of goods in small warehouses.

Fixed electric hydraulic scissor lift

The body is fixedly installed on the ground or at a specific workstation, fixed by embedded bolts or welding, with precise lifting stroke and strong load capacity (up to 1000kg or more). Suitable for material transportation on production lines, vertical transfer of goods between floors, and maintenance of fixed workstation equipment.

2. Classify by homework scenario

Indoor electric hydraulic scissor lift

Using low-noise motors and seamless rubber wheels, the operating noise is ≤ 70dB, and it will not damage epoxy flooring, ceramic tiles, and other surfaces. The height and width of the body have been optimized, making it suitable for decoration and maintenance in indoor environments such as shopping malls, hospitals, and office buildings through elevators and narrow passages.

Outdoor off-road electric hydraulic scissor lift

Equipped with reinforced chassis and off-road anti-skid tires, the scissor arm is made of thickened steel, which has a certain climbing ability (≤ 25%) and anti bumps. Optional rain cover and windproof device, suitable for complex outdoor conditions such as municipal engineering, construction, and maintenance of outdoor venues.

3. Classify by platform structure

Standard platform electric hydraulic scissor lift

The homework platform is a closed structure, equipped with safety guardrails around it, and the tabletop is anti slip and wear-resistant. The platform has a fixed area and uniform load distribution, suitable for routine personnel operations and small material handling.

Extension platform electric hydraulic scissor lift

One side of the homework platform can be horizontally extended by 0.5-1.0m, and the extended part can bear up to 200kg, which can expand the homework range without moving the machine body. Suitable for work scenarios such as high-altitude pipeline laying and partial exterior wall decoration that require crossing obstacles.

Working Principle

1. Power supply link

The equipment uses batteries as its core power source to deliver electrical energy to the motor; After the motor is started, it drives the hydraulic pump to operate, converting electrical energy into mechanical energy of the hydraulic pump, providing the power foundation for the entire system.

2. Hydraulic transmission link

When the hydraulic pump is running, it extracts hydraulic oil from the hydraulic oil tank and pressurizes it to form high-pressure oil; High pressure oil is transported to the control valve group (including directional valves, relief valves, check valves, etc.) through hydraulic pipelines.

When operating the up button, the directional valve switches to the up path, and high-pressure oil is injected into the rodless chamber of the hydraulic cylinder, pushing the cylinder piston rod outward;

When operating the descent button, the directional valve switches to the descent path, and the oil in the hydraulic cylinder flows back to the oil tank. The piston rod slowly retracts under the weight of the platform or the load;

The overflow valve plays an overload protection role, automatically releasing pressure when the system pressure exceeds the set value, avoiding damage to hydraulic components due to high pressure.

3. Mechanical lifting process

The piston rod of the hydraulic cylinder is hinged to the scissor arm, which adopts a diamond hinge structure and is composed of high-strength steel connected by a pin shaft.

When rising: the piston rod extends, pushing the hinge point of the scissor arm to expand outward, and the diamond structure gradually unfolds, driving the top work platform to rise vertically; The rigid structure of the scissor arm can evenly distribute the load pressure, ensuring a smooth lifting process without shaking.

When descending: the piston rod retracts, the scissor arm shrinks inward under the weight and load of the platform, and the diamond structure gradually folds, causing the work platform to slowly descend.

4. Control and security assurance process

The equipment is equipped with an integrated control panel, and the operator controls the passage switching of the directional valve through buttons to achieve lifting start stop and speed adjustment; Simultaneously equipped with overload warning, anti overturning sensors, emergency descent valves, and other devices.

Product Application

1. Industrial manufacturing field

Suitable for fully self-propelled/fixed models, used for factory workshop equipment maintenance, production line maintenance, mold installation and debugging, high-altitude component assembly and other operations. The equipment has strong load-bearing capacity and precise lifting, and can move flexibly in narrow passages in the workshop. Low noise operation does not affect the normal operation of the production line; Fixed models can also serve as vertical transfer platforms for production line materials, improving workshop logistics efficiency.

2. In the field of warehousing and logistics

Suitable for mobile/fully self-propelled models, targeting scenarios such as high-level shelf goods storage and retrieval, warehouse inventory, shelf installation and maintenance. The equipment can easily enter the gap between the shelves, and the platform can be extended to expand the pickup range. There is no need to use large equipment such as forklifts, and a single person can operate it, greatly reducing the labor cost of high-altitude warehousing operations.

3. Commercial buildings and venues field

Suitable for indoor models, used for ceiling decoration, lamp replacement, air conditioning maintenance, and billboard installation in shopping malls, office buildings, and hotels; Ceiling cleaning, signage maintenance, equipment upkeep, and other operations can also be carried out in large venues such as airports, high-speed rail stations, and convention centers. The indoor model adopts seamless rubber wheels, which will not damage the epoxy floor, ceramic tiles and other floor materials. The low noise characteristics meet the quiet needs of commercial places.

4. Municipal engineering and outdoor operation and maintenance field

Suitable for off-road models, used for outdoor operations such as municipal street lamp maintenance, traffic signal light debugging, garden tree pruning, elevated bridge cleaning, and exterior wall coating construction. The off-road model is equipped with a reinforced chassis and anti-skid tires, which can adapt to complex terrains such as mud, sand and gravel, and have a certain climbing ability. It is also equipped with windproof and rainproof features to meet the needs of outdoor all-weather operations.

5. Special industry applications

New energy industry: used in photovoltaic power stations and wind power bases for photovoltaic panel installation and commissioning, as well as wind turbine engine room maintenance;

In the pharmaceutical and food industry, equipment maintenance and pipeline installation are carried out in clean workshops, and the zero emission and oil-free characteristics meet the standards of clean production;

Emergency rescue field: In small fires and high-altitude rescue scenarios, it serves as a temporary high-altitude platform to assist personnel in quickly reaching designated heights for rescue.

Company Strengths

We focus on the research and development, manufacturing, and service of electric hydraulic scissor lifts. With four core advantages of leading technology, excellent quality, comprehensive service, and strong customization capabilities, we have become an industry benchmark and provide efficient, safe, and intelligent high-altitude operation solutions for global customers.

We always adhere to the concept of "safety first, innovation driven, and customer first", and are committed to becoming the preferred brand in the global electric hydraulic scissor lift field, providing every customer with a more efficient, safe, and intelligent high-altitude operation experience.

FAQ

1. Question: What is the core working principle?

Answer: The motor-driven hydraulic system drives the scissor arm to retract and expand, achieving smooth platform lifting and lowering, combining the advantages of electric energy saving and hydraulic stability.

2. Question: What are the core advantages?

Answer: Low noise and zero emissions, smooth lifting and strong load-bearing capacity, suitable for small spaces, low maintenance costs, and suitable for indoor and outdoor operations.

3. Question: What qualifications are required for operation?

Answer: Operators need to hold a special equipment operator certificate (for high-altitude operations), and the equipment needs to undergo annual inspection.

4. Question: Use core security requirements?

Answer: Before starting work, the support legs should be firmly padded. Overloading and uneven loading are strictly prohibited. Outdoor work is prohibited in strong winds above level six.

5. Question: What are the key points of daily maintenance?

Answer: Regularly check the battery level, hydraulic oil status, and test the sensitivity of the emergency stop button and limit switch.